Ignition ACL LED Par 64 User Manual page 26

Starting up
DMX indicator
Connections in master/slave
mode
ACL LED Par 64
26
LED PAR
When the device and the DMX controller are in operation and a DMX signal is received at the
input, the display shows 'Dmx In' .
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.