Behaviour on DMX control
failure
1.
Press [Mode] and use [Up] or [Down] to select the menu item 'SETTINGS' . Confirm with
[Setup].
2.
Use [Up] or [Down] to select the menu item 'Dmx Fail' . Confirm with [Setup].
3.
Use [Up] or [Down] to select the device behaviour on DMX signal failure. The following
table shows the available options.
Menu level 2
'Dmx Fail'
4.
Press [Setup]to accept the selection.
Menu level 3
Function
'Off'
If the DMX control fails, the device is
blacked out.
'Hold'
If the DMX control fails, the last set‐
ting is retained.
Operating
ACL LED Par 64
39
LED PAR