Ignition ACL LED Par 64 User Manual page 35

Dimmer curve
1. Press [Mode] and use [Up] or [Down] to select the menu item 'SETTINGS' . Confirm with
[Setup].
2.
Use [Up] or [Down] to select the menu item 'Curves Select' . Confirm with [Setup].
3. Use [Up] or [Down] to select the desired dimmer curve. The following table shows the
available options.
Menu level 2
'Curves Select'
4. Press [Setup] to accept the selection.
Menu level 3
' Curves 1 linear'
' Curves 2 Square'
'Curves 3 Inv Squa'
'Curves 4 S-Type'
Operating
Function
Linear course
Exponential course
Logarithmic course
S-curve shaped course
ACL LED Par 64
35
LED PAR