Ignition ACL LED Par 64 User Manual page 33

Slave mode
Mode Display
1-channel '1-CH'
2-channel '2-CH'
When the DMX mode is activated, the display shows 'Dmx In' .
1. Press [Mode] and use [Up] or [Down] to select the menu item 'SLAVE' . Confirm with
[Setup].
2.
Use [Up] or [Down] to select the menu item 'Yes' and confirm with [Setup] to enable the
Slave mode.
ð The device is now working in slave mode, i.e. it will exactly copy the movement of
the controlling master device, correct wiring provided.
To deactivate slave mode, select 'No' and confirm with [Setup].
This setting is only relevant if the device is not controlled via DMX.
Operating
Highest possible DMX address
512
511
ACL LED Par 64
LED PAR
33