Ignition ACL LED Par 64 User Manual page 40

Operating
Calibration
ACL LED Par 64
40
LED PAR
1. Press [Mode] and use [Up] or [Down] to select the menu item 'SETTINGS' . Confirm with
[Setup].
2.
Use [Up] or [Down] to select the menu item 'CALIBRAT.' . Confirm with [Setup].
3. Press [Up] or [Down] until the password 088 appears in the display. Confirm with [Setup].
4.
Use [Up] or [Down] to select the menu item for which the calibration is to be carried out.
The following table shows the available options.
Menu level 2 Menu level 3
'CALIBRAT.' 'Password'
(088)
5.
Press [Setup] to accept the selection.
Menu level 4
'Dimmer Fine 000' ...
'Dimmer Fine 255'
'White Bal 000' ...
'White Bal 255'
'Default Yes' / 'Default No'
Function
Dimmer fine calibra‐
tion
White balance cali‐
bration
Default values of the
device