Ubiquiti PrismStation AC Quick Start Manual page 13

Connecting to the PoE Adapter
1. Connect the Ethernet cable from the PrismStation to the
POE port on the PoE Adapter.
2. Connect an Ethernet cable from your LAN to the LAN port
on the PoE Adapter.
3. Connect the Power Cord to the PoE Adapter, and then plug
the Power Cord into a power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place
the bracket at the desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket
using two fasteners (not included).
3. Align the adapter's slots with the tabs of the PoE Mounting
Bracket, and then slide the adapter down.
Available from A1 Security Cameras
a1securitycameras.com email: sales@a1securitycamera