Table of Contents
Advertisement
Hardware Overview
GPS Antenna
Connector
GPS Antenna Connector
GPS Antenna.
Power LED
connected to a power source.
Ethernet Port
the power and should be connected to the LAN and DHCP
server.
Reset Button
Reset button for more than 10 seconds while the PrismStation
is powered on. Alternatively, the PrismStation may be reset
remotely via a Reset button located on the bottom of the
Gigabit PoE Adapter.
Release Button
counterclockwise while depressing the Release Button.
Available from A1 Security Cameras
a1securitycameras.com email: sales@a1securitycamera
Power
LED
Reset
Button
Ethernet
Port
This is used to connect the included
The LED will light blue when the device is
This Gigabit Ethernet port is used to connect
To reset to factory defaults, press and hold the
To remove the attached horn, rotate the horn
Release
Button
Advertisement
Table of Contents
