Related Manuals for Ubiquiti PrismStation AC
Summary of Contents for Ubiquiti PrismStation AC
- Page 1 Shielded airMAX ac Radio ® with airPrism Technology and ® Dedicated Wi-Fi Management Model: PS-5AC Available from A1 Security Cameras a1securitycameras.com email: sales@a1securitycamera...
-
Page 2: Package Contents
Power Cord Quick Start Guide with Mounting Bracket TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable ™ designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. -
Page 3: Installation Requirements
AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcable • Surge protection should be used for all outdoor installations. -
Page 4: Hardware Overview
Hardware Overview Power Reset Button GPS Antenna Connector Ethernet Port GPS Antenna Connector This is used to connect the included GPS Antenna. Power LED The LED will light blue when the device is connected to a power source. Ethernet Port This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. -
Page 5: Hardware Installation
Hardware Installation These instructions show the PrismAP-5-45; however, the PrismStation is also compatible with the following horns: • PrismAP-5-30 • PrismAP-5-60 • PrismAP-5-90 1. To install the horn, insert the PrismAP into the PrismStation and align the arrow on the horn with the Release Button. 2. -
Page 6: Pole Mounting
Pole-Mounting 1. Attach the Pole Clamp to the Mounting Bracket. a. Hold the Mounting Bracket with its clamps facing you and the head of the Tightening Bolt facing upward. b. Insert the two Carriage Bolts through the holes of the Mounting Bracket. - Page 7 3. Mount the PrismStation on the pole and secure it. a. Place the Mounting Bracket against the pole. b. Slide the slot of the Pole Clamp over the adjacent Carriage Bolt. c. Tighten the Flange Nuts of the bolts to 25 N ∙ m to secure the Mounting Bracket to the pole.
- Page 8 5. Adjust the elevation angle. a. Loosen the Elevation Screw on the bottom of the bracket. Elevation Screw b. Pivot the PrismStation until the Elevation Indicator shows the desired elevation angle. Elevation Indicator c. Tighten the Elevation Screw to 15 N ∙ m. Available from A1 Security Cameras a1securitycameras.com email: sales@a1securitycamera...
- Page 9 Connecting to Power and GPS 1. Remove the port cover by lifting up the latch of the cover and sliding the cover out. 2. Remove the rubber gasket from the port cover. Available from A1 Security Cameras a1securitycameras.com email: sales@a1securitycamera...
- Page 10 3. Connect an Ethernet cable to the Ethernet port. 4. Connect the GPS Antenna to the GPS Antenna Connector. Available from A1 Security Cameras a1securitycameras.com email: sales@a1securitycamera...
- Page 11 5. Punch out the cutout for the GPS cable. 6. Replace the port cover. Available from A1 Security Cameras a1securitycameras.com email: sales@a1securitycamera...
- Page 12 7. Fit the rubber gasket over the Ethernet cable, and then slide the gasket into the port cover. 8. Place the magnetic GPS Antenna on a steel surface near the PrismStation. Note: Ensure that the GPS Antenna has clear line of sight to the sky for proper GPS reception.
- Page 13 Connecting to the PoE Adapter 1. Connect the Ethernet cable from the PrismStation to the POE port on the PoE Adapter. 2. Connect an Ethernet cable from your LAN to the LAN port on the PoE Adapter. 3. Connect the Power Cord to the PoE Adapter, and then plug the Power Cord into a power outlet.
- Page 14 Accessing airOS via Wi-Fi Verify connectivity in the airOS® Configuration Interface. There are two methods, the UNMS and Web Portal. Both ™ are available for 15 minutes immediately after you power on the PrismStation. If necessary, you can power cycle the PrismStation to re-enable its Wi-Fi.
- Page 15 5. Tap Connect on the Login screen. 6. Select your Country and tap Done. 7. Customize your settings as needed. Available from A1 Security Cameras a1securitycameras.com email: sales@a1securitycamera...
- Page 16 Web Portal 1. Connect your device’s Wi-Fi to the PrismStation SSID named: PS-5AC:<MAC Address> Note: Ensure that your Wi-Fi connection has DHCP enabled. 2. Launch your web browser and go to: http://setup.ubnt.com 3. Enter ubnt in the Username and Password fields. Select your Country and Language.
-
Page 17: Installer Compliance Responsibility
Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements. The Antenna and Output Power fields are provided to the professional installer to assist in meeting regulatory requirements. -
Page 18: Specifications
Specifications PS-5AC Dimensions 155 x 155 x 104 mm (5.16 x 5.16 x 4.09") Mounting Hardware Only 83 x 117 x 69 mm (3.27 x 4.61 x 2.72") Weight 0.77 kg (1.70 lb) Mounting Hardware Only 0.79 kg (1.74 lb) Networking Interface (1) 10/100/1000 Ethernet Port RF Connector... -
Page 19: Safety Notices
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. -
Page 20: Limited Warranty
(VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. -
Page 21: Limitation Of Liability
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. - Page 22 Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
- Page 23 ISED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 6545A-PS5AC) has been approved by ISED Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type...
-
Page 24: Australia And New Zealand
Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. - Page 25 RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
- Page 26 Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 27: Declaration Of Conformity
English Hereby, UBIQUITI NETWORKS declares that the radio equipment type PS-5AC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ubnt.com/compliance Eesti keel [Estonian] Käesolevaga deklareerib UBIQUITI NETWORKS, et käesolev raadioseadme... -
Page 28: Online Resources
New York, NY 10017 ©2016-2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airMAX, airOS, airPrism, PrismStation, TOUGHCable, and UNMS are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S.