Ubiquiti PrismStation AC Quick Start Manual page 12

Shielded airmax ac radio with airprism technology and dedicated wi-fi management

Table of Contents

7. Fit the rubber gasket over the Ethernet cable, and then

slide the gasket into the port cover.

8. Place the magnetic GPS Antenna on a steel surface near the

PrismStation.

9. Connect the power using one of the following options:

• Using the included Gigabit PoE Adapter: Go to

• Using a separate PoE switch: Connect the Ethernet

Available from A1 Security Cameras

a1securitycameras.com email: sales@a1securitycamera

Note:

Ensure that the GPS Antenna has clear line of

sight to the sky for proper GPS reception.

Connecting to the PoE Adapter.

cable from the PrismStation's Ethernet port to a

PoE-enabled Ethernet port on the switch.

WARNING:

power specifications listed in the Specifications

section of this Quick Start Guide.

The switch port must comply with the

Table of Contents