Ubiquiti PrismStation AC Quick Start Manual page 7

3. Mount the PrismStation on the pole and secure it.
a. Place the Mounting Bracket against the pole.
b. Slide the slot of the Pole Clamp over the adjacent
c. Tighten the Flange Nuts of the bolts to 25 N ∙ m to
4. Insert the PrismStation into the Mounting Bracket, and then
tighten the bolt to lock the PrismStation in place.
Note:
Ø 25 - 75 mm pole.
Available from A1 Security Cameras
a1securitycameras.com email: sales@a1securitycamera
Carriage Bolt.
secure the Mounting Bracket to the pole.
25 N ∙ m
The mounting assembly can accommodate a