Advertisement
The installation begins, do not interrupt process until the installation is complete. A successful installation returns an OK
message. An unsuccessful installation returns a FAILED message. If the installation fails, study the smit.log file to determine
the cause.
13. Press: F10.
14. After the RealPort® software is successfully installed, the user should configure the 7036-P16 IP address,
Configuration.
Linux SuSE Installation Instructions
These steps move the rpm source file from the 7036-P16 Software and Documentation CD to the server.
1. Login as root.
2. If the 7036-P16 Software and Documentation CD is already inserted and mounted, then proceed to 5.
3. Insert the 7036-P16 Software and Documentation CD into the CD-ROM drive.
4. Type: mount -t auto /dev/cdrom /mnt .
5. This step displays the name of the RealPort® rpm file, which is 40002086_K.src.rpm
Type: ls -l /mnt/linux.
6. Type: cp /mnt/linux/40002086_K.src.rpm /usr/src/packages/SOURCES.
7. Type: umount /mnt .
8. The next steps are required to prepare for the rpmbuild.
Type: uname -a.
This causes the kernel level to be displayed, which is needed in the next step.
9. Type: cd /usr/src/linux <kernel level>.
10. Type: make mrproper.
11. Type: make oldconfig.
12. The next steps perform the rpmbuild.
Type: cd /usr/src/packages/SOURCES.
13. Type: rpmbuild --rebuild 40002086_k.rpm .
14. Type: rpm -i /usr/src/packages/RPMS/ppc64/dgrp-1.9-1.ppc64.rpm.
15. Type: rpm -qa | grep dgr
If the RealPort® Package installed correctly the following is displayed: dgr-1.9.1 .
Once this step is done successfully, the RealPort® installation on SuSE is complete.
16. After the RealPort® software is successfully installed, the user should configure the IP address, go to 7036-P16 IP address,
7036-P16 Network
Linux Red Hat Installation Instructions
1. Login as root
2. If the 7036-P16 Software and Documentation CD is already inserted and mounted, then proceed to 5.
3. Insert the 7036-P16 Software and Documentation CD into the CD-ROM drive.
4. Type: mount -t auto /dev/cdrom /mnt
5. Type: ls -l /mnt/linux
This step should reveal the name of the RealPort® rpm file, which should be: 40002086_k.src.rpm
6. Type: cp /mnt/linux/40002086_k.src.rpm /usr/src/packages/SOURCES
7. Type: umount /mnt
Configuration.
7036-P16 Network
Advertisement
