Dram Installation - TYAN S1471 User Manual

3.9DRAM Installation

The S1471 uses a 64-bit data path from memory to CPU and can
accommodate up to 128 MB of RAM. The mainboard supports Fast
Page Mode, and EDO (Extended Data Out) 72 pin SIMMs.
SDRAM(Synchronous) are also supported in the DIMM slots. DIMM's
must be of the unbuffered variety. All installed memory will be automati-
cally detected so there is no need to set jumpers.
wSIMM modules must be installed in pairs.
wEach pair of SIMMs must be of the same size and type.
wThe mainboard supports 1, 2, 4 and 8MBx32 SIMMs.
wSIMM bank 0 and 1 can use either double or single sided SIMMs.
wTwo SIMMs or One unbuffered DIMM must be installed for the system
to POST.
wSDRAM DIMMs can be installed one at a time.
wThe mainboard supports 1, 2 and 4Mx 64 DIMM modules.
wSIMM bank 0 and DIMM bank 0 cannot be used at the same time.
SIMM bank 1 and DIMM bank 1 cannot be used at the same time.
You can use SIMM bank 0 with DIMM bank 1.
You can use SIMM bank 1 with DIMM bank 0.
wThe following table shows some of the available memory configurations.
DRAM Bank DRAM
0 Bank 1
4MB x2 none
none none
none none
8MB x2 none
4MB x2 4MB x2
8MB x2 8MB x2
16MB x2 none
none none
32MB x2 none
16MB x2 16MB x2
16MB x2 none
none none
32MB x2 16MB x2
32MB x2 none
32MB x2 32MB x2
S1471-001-01 http://www.tyan.com
SDRAM Bank SDRAM Bank
0 1
none none
8MB x1 none
16MB x1 none
none none
none none
none none
none none
16MB x1 none
none none
none none
none 32MB x1
32MB x1 32MB x1
none none
none 32MB x1
none none
14
Total
8MB
8MB
16MB
16MB
16MB
32MB
32MB
32MB
64MB
64MB
64MB
64MB
96MB
96MB
128MB