TYAN Trinity ATX Motherboard S1598 User Manual page 6

Chapter 1
Introduction
On Board Cache
Chipset Information
BIOS Information
System Memory
Expansion Slots
On Board PCI IDE
On Board I/O
•On board Pipeline Burst SRAM 1MB
•512K or 2MB (manufacturing option)
•VIA MVP3 100MHz memory & AGP
controller(VT82C598AT)
•VIA VT82C686 Super I/O controller
•Award BIOS on 2MB flash RAM
•Plug and Play
•APM 1.2 / ACPI 1.0 / PC98 compliant
•IDE drive auto configure
•Soft power-down
•Multiple boot options
•DMI 2.0 compliant
•Hardware monitoring of CPU voltage, temperature,
and Fan status
•Supports 8MB to 768MB
•Three 3.3V unbuffered 168-pin DIMM sockets.
•Maximum rated memory bus speed 100MHz
•Supports EDO, SDRAM, Parity, and ECC (ECC only
with Parity memory)
•One AGP Slot (supports 66/133MHz speeds)
•Five 32-bit PCI 2.1 Bus Master slots.
•Two 16-bit ISA slots.
•One shared, seven usable slots total.
•All slots support full length add-on cards
•Two 40-pin IDE connectors for up to 4 drives
•PIO Mode 3 / 4, UltraDMA33/66 supported
•ATAPI IDE CD-ROM and LS-120 supported
•One Floppy port (1.44MB, 2.88MB, 3-mode)
•Two 9-pin 16550 UART Serial ports
•One 25-pin ECP / EPP Parallel port
•One Fast IR TX / RX header
•Two USB (0,1) rev 1.2 ports
•Two USB (2,3) rev 1.2 ports via cable (optional)
•PS/2 Mouse and Keyboard ports
6
http://www.tyan.com