TYAN Trinity ATX Motherboard S1598 User Manual page 52

Chapter 3
BIOS Configuration
Settings Chart (continued)
Setting Option
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
CPU to PCI Write Buffer
PCI Dynamic Bursting
PCI Master 0 WS Write
PCI Delay Transaction
PCI #2 Access #1 Retry
AGP Master 1 WS Write
AGP Master 1 WS Read
Assign IRQ for USB
Assign IRQ for VGA
Slot 1 Use IRQ No.
Slot 2 Use IRQ No.
Slot 3 Use IRQ No.
Slot 4 Use IRQ No.
Slot 5 Use IRQ No.
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware (e.g.,
Windows 95).
Resources Controlled By
The Plug and Play EliteBIOS can automatically configure all the boot and Plug
and Play-compatible devices. If you select Auto, all the interrupt request (IRQ)
and DMA assignment fields disappear, because the BIOS automatically
assigns them.
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have installed a
new add-on and the system reconfiguration has caused such a serious conflict
that the operating system cannot boot.
BIOS Default Setup Default
PCI / ISA PnP PCI / ISA PnP
PCI / ISA PnP PCI / ISA PnP
PCI / ISA PnP PCI / ISA PnP
PCI / ISA PnP PCI / ISA PnP
PCI / ISA PnP PCI / ISA PnP
Enabled Enabled
Disabled Enabled
Enabled Enabled
Disabled Enabled
Disabled Disabled
Disabled Enabled
Disabled Disabled
Enabled Enabled
Disabled Enabled
Auto Auto
Auto Auto
Auto Auto
Auto Auto
Auto Auto
52
http://www.tyan.com