Troubleshooting (Audio System Type 2) - Mitsubishi MOTORS L200 Owner's Manual

Troubleshooting (audio system type 2)

Troubleshooting (audio system type 2)
Please check these items if a message appears on the display, or if you think something is not working properly.
If This Message Appears...
A message is displayed on this product according to the situation.
Mode Message
CD CHECK DISC
7
DISC ERROR
INTERNAL E
HEAT ERROR
USB
FILE ERROR
USB BUS PWR There is high or low electrical current or voltage.
LSI ERROR
UNSUPPORTED
FORMAT
UNSUPPORTED
DEVICE
7-80 For pleasant driving
Cause
The disc is inserted upside down.
The disc has condensation on it.
The disc is damaged.
The disc is dirty.
The drive has malfunctioned for some reason.
The temperature inside the product is high.
Files that cannot be played are selected.
There is an internal malfunction for some reason.
Unsupported audio files have been played.
An unsupported USB device has been connected.
Insert with the label side up.
Wait a while before inserting again.
Clean the read surface of the disc.
Check that there is no problem with the disc, and insert
the disc again. If the problem persists, consult a
MITSUBISHI MOTORS Authorized Service Point.
Remove the disc, and wait for the internal temperature
to return to normal.
Select files that can be played.
→ "Audio Files (MP3/WMA/AAC) (audio system type
2)" on page 7-56
Turn the power OFF and wait a short while. If the prob-
lem persists, consult a MITSUBISHI MOTORS Author-
ized Service Point.
Confirm audio files that can be played.
→ "Audio Files (MP3/WMA/AAC) (audio system type
2)" on page 7-56
Please connect a USB memory device.
OKTE15E3
E00738401105
Response