Mitsubishi MOTORS L200 Owner's Manual page 71

3. Tip the armrest forward. Open the fas-
tener (B) that is located in the space
where the armrest was stowed.
4. Put your hand in the opening of the fas-
tener, attach the tether strap's hook (C)
to the tether anchorage (D), and securely
tighten the tether strap.
Installing a child restraint sys-
tem to the lower anchorage
(ISOFIX child restraint mount-
ings)*
Your vehicle's second seat is fitted with low-
er anchorages for attaching a child restraint
system with ISOFIX mountings.
Child restraint system with
ISOFIX mountings
The child restraint system is designed only
for seats that incorporate lower anchorages.
Retain the child restraint system using the
lower anchorages.
OKTE15E3
It is not necessary to retain the child restraint
system using the vehicle's seat belts.
E00408900114
A- Child restraint system connectors
To install
WARNING
l If there is any foreign material in or
around the connectors, remove it before
installing the child restraint system. Also,
make sure the seat belt is away from, not
looped through or otherwise interfering
with, the child restraint system. If foreign
matter is not removed and/or the seat belt
E00409000574
interferes with the child restraint system,
the child restraint system will not be se-
cured properly and could move forward
in the event of sudden braking or a colli-
sion, seriously injuring the child and pos-
sibly other vehicle occupants.
Seat and seat belts
Child restraint
4
4-25