TurboChef HHB-8028 Service Manual page 77

8. Reinstall Insulation Shield.
9. Reattach Right Side Panel.
Jetplates (Figure 57)
The Jetplates help maximize food quality. Different
Jetplates facilitate different cooking results.
To replace a Jetplate:
1. Ensure "Cool Down" process is completed. ("Cool
Down" message will disappear upon completion.)
2. Remove Oven Rack.
81
80
NUMBER PART
80 Rack
81 Support Rail – Bottom Left
82 Support Rail – Bottom Right
83 Support Rails – Top (x2)
84 Jetplate – Standard – Bottom
85 Jetplate – Standard – Top
Removing Jetplates
3. Remove Support Rails.
NOTE: Removing hardware is not required –
the Support Rails snap on and off. However,
they may require a gentle tap with a utensil to
snap into and out of place.
4. Replace Jetplate(s). For a listing of the different
types of Jetplates, see the comprehensive part
listing, page 65.
5. Reinstall Support Rails and Oven Rack.
85
84
83
82
THE IMPINGEMENT CIRCUIT
PART NUMBER
HHB-8104
HHB-8058-1
HHB-8058-2
HHB-8117
HHB-8013-1
HHB-8013-2
55