Safety Information; Safety Symbols; Warning - KNOVA KN 8059 Manual

SAFETY INFORMATION

This meter is designed and manufactured according to the safety
requirements set out by the IEC61010-1 standards for electronic test
instruments and the hand-hold digital multimeters. Its design and
manufacture is strictly based on the provisions in the CAT III 600V of
IEC61010-1 and the Stipulation of 2-Pollution Grade.

Safety Symbols

Risk of danger. Important information. See manual.
Hazardous voltage.
Application around and removal from Hazardous Live conductors is
permitted.
Double insulated (Protection class II)
Earth ground
!

WARNING

• To avoid possible electric shock, personal injury, or death, read
the following before using the Meter:
• Use the test leads supplied to ensure operation safety. If required,
they must be replaced with test leads of the same model or class.
• Inspect the test leads before use. Do not use them if insulation is dam
aged or metal is exposed. Check the test leads for continuity. Replace
damaged test leads before using. Do not use the Meter if it appears
damaged.
• Do not touch the metal tips of the test leads when the meter is con
nected to the circuit to be measured.
1
KNOVA