Replace Battery; Accessory - KNOVA KN 8059 Manual

REPLACE BATTERY

!
WARNING
To avoid possible electric shock, disconnect the test leads
from the circuit under test before replacing the battery. Replace
with the same type of battery.
Make sure the transformer jaw and the test leads are disconnected from
the circuit being tested before opening the case bottom. Check battery
has been installed and battery cover has been screwed before use. Re-
place the battery as soon as the battery indicator "
Performs replace battery
1. Disconnect test leads from live circuit, switch rotary switch to "OFF"
position.
2. Remove test leads form input terminals
3. Remove the screw from the battery cover, and separate the
battery compartment from the case bottom. Replace the battery with
3pcs of new 1.5V (AAA) batteries.
4. Rejoin the case bottom and the battery cover, and reinstall the screw.
Accessories
• manual
• Test leads
• box
•1.5V SIZE AAA Battery
14
" appears.
+ -
1
2
1
3