KNOVA KN 8059 Manual page 11

!
WARNING
• When LCD display "OL", select higher range to measure
• When measuring in-circuit capacitance, make sure that the power
of the circuit under test has been turned off and that all capacitors
have been fully discharged.
Measuring temperature
1. Set the rotary switch to ˚C.
2. LCD will display environment temperature.
3. If required, plug thermocouple's (K TYPE) red terminal into INPUT
terminal and black terminal into COM terminal, measure object
surface or around temperature with thermocouple's probe
4. The Measured value shows on the display.
Measuring frequency, duty
1. Plug the black test lead into the COM terminals and the red test lead
into the INPUT terminals
2. Set the rotary switch to V , press Hz% button switch to Hz or DUTY
mode, connect the test leads to the object being measured.
3. The Measured value shows on the display
~
9
KNOVA