Safety Information; Safety Symbols; Maintenance - KNOVA KN 8052 Manual

1. SAFETY INFORMATION

This multimeter has been designed according to IEC61010-1 concerning
electronic measuring instruments with an overvoltage category (CATII)
and pollution 2. Follow all safety and operation instructions to ensure that
the meter is used safely and is kept in good operating condition.
Full compliance with safety standards can be guaranteed only with test
leads supplied. If necessary, they must be replaced with the type specified
in this manual.
SAFETY SYMBOLS
Important safety information, refer to the operating
manual.
Dangerous voltage may be present.
Anti-garbage
Double insulation (Protection class II).
Fuse must be replaced with rating specified in the
manual.

MAINTENANCE

• Before opening the case, always disconnect test leads from all
energized circuits.
• For continue protection against fire; replace fuse only
with the specified voltage and current ratings:
250mA/250V(Quick Acting) 10A/250V(Quick Acting)
• Never use the meter unless the back cover is in place
and fastened completely.
Do not use abrasives or solvents on the meter. To clean
It, use a damp cloth and mild detergent only.
1
KNOVA