KNOVA KN 8059 Manual page 10

Measuring Diode
1. Plug the black test lead into the COM terminals and the red test lead
into the INPUT terminals
2. Set the rotary switch to
the test leads to the object being measured (Connect the red test lead to
the anode and the black test lead to the cathode of the diode).
3. The Measured value shows on the display
Testing for Continuity
1. Plug the black test lead into the COM terminals and the red test lead
into the INPUT terminals
2. Set the rotary switch to
the test leads to the object being measured.
3. The buzzer sounds if the resistance of a circuit under test is less than
60
The buzzer may or may not sounds if the resistance of a circuit
under test is between 60 Wto 120 W, the buzzer does not sound if
the resistance of a circuit under test is higher than 120W.
Measuring Capacitance
1. Plug the black test lead into the COM terminals and the red test lead
into the INPUT terminals
2. Set the rotary switch to
the test leads to the object being measured.
3. The Measured value shows on the display
, press SEL button switch to
, press SEL button switch to
, press SEL button switch to
8
, Connect
, Connect
, connect