Operation - KNOVA KN 8059 Manual

MEASUREMENT OPERATION
DC Voltage Measurement
1. Plug the black test lead into the COM terminals and the red test lead
into the INPUT terminals
2. Set the rotary switch to V , press SEL button switch to DC voltage,
connect the test leads to the object being measured.
3. The measured value shows on the display.
!
WARNING
• Select the highest range if the value scale to be measured
in the manual range is unknown
•To avoid harms to you or damages to the Meter from electric shock
AC Voltage Measurement
1. Plug the black test lead into the COM terminals and the red test lead
into the INPUT terminals
2. Set the rotary switch to V , press SEL button switch to AC voltage,
connect the test leads to the object being measured.
3. The measured value shows on the display
!
WARNING
•To avoid harms to you or damages to the Meter from
electric shock
~
~
6