Battery & Fuse Replacement; Accessories - KNOVA KN 8052 Manual

BATTERY & FUSE REPLACEMENT
+ -
If " "appears on display, it indicates that the battery
should be replaced.
The fuse rarely needs replacement and blows almost always as a result
of operator's error.
To replace the battery and the fuse (250mA/250V and 10A/250V)
remove the 2 screws in the bottom of the case. Simply remove the old
one, and replace with a new one.
Be careful to observe battery polarity.
!
WARNING
Before attempting to open the case, always be sure that test
leads have been disconnected from measurement circuits. Close case
and tighten screws completely before using the meter to avoid electrical
shock hazards.

ACCESSORIES

• Operator's instruction manual
• Set of test leads
• Gift box
• 9 volt battery. NEDA 1604 6F22 006P type (optional)
11
KNOVA