Alexa; Backlighting And Underlighting - Nixie Clock ITS1A Manual

ITS1A CLOCK
If there is no preset menu visible, it is because the settings on that screen affect all presets, for example
the Alexa config screen.

Alexa

You can control the clock from Alexa. You have to make Alexa discover devices while the clock is turned
on, literally say 'Alexa, discover my devices'. My Alexa claims not to have found any new devices, but it
really has, so ignore that. If you look at the Alexa config screen on the clock, you will see all the
'switches' that can be turned on and off. For example, you can say 'Alexa turn on date' and it will display
the date. Say 'Alexa turn off date' and it will switch back to the time.
The names of these 'switches' can be changed on the Alexa config screen on the clock. You will have to
re-discover devices after you have done this.

Backlighting and Underlighting

You decide!
There are signal lines to the display board that will drive a string of Neopixels, and the software has a
screen that allows you to configure what they display. However if you want backlighting, you will have
to figure out how to wire some neopixels up and mount them.
21