Contents Overview Setup and software Power and setup Load software Adjust the headband Position the boom Adjust the boom Basics Make/take/end calls Volume Mute Troubleshooting Headset Support...
Overview Standard LEDs Icons Inline control LEDs What they mean Call button Flashing green Incoming call Solid green On a call Slow flashing green Call on hold Volume up button Increases the listening volume Volume down button Decreases the listening volume Mute button Solid red Headset muted...
Some softphones require the installation of Plantronics Hub for Windows/Mac to enable headset call control (answer/end and mute) functionality. Download Plantronics Hub for Windows/Mac by visiting poly.com/software. Manage your headset settings on your computer with Plantronics Hub: • Call control for softphones •...
Adjust the headband Lengthen or shorten the band until it fits comfortably. The cushions should sit comfortably over the center of your ears. Position the boom This headset can be worn on the left or right side. Rotate the boom to align with your mouth. CAUTION To avoid breaking the boom, only rotate it up and over 180°.
Plantronics Hub or do not have a compatible softphone, press the headset call button first and then make/take/end the call using the softphone application. Download Plantronics Hub for Windows or Mac at poly.com/software. Answer or end a call Tap the Call button or use your softphone.
Troubleshooting Headset I hear a high-pitched noise when • Ensure that your 3.5 mm connector is fully connected to the wearing the headset. headset controller. I cannot hear caller. • Listening volume is too low. Press the volume up button on the headset.
Need help?
Do you have a question about the Blackwire 3300 Series and is the answer not in the manual?
Questions and answers