Page 1
EncorePro 300 Series Corded Headset User Guide...
Page 2
Contents Overview Setup Load software Adjust the headband Position the boom Adjust the boom Basics Make/take/end calls Volume Mute Support...
Page 3
Overview Icons Inline control LEDs Function Call button Triple flash green Incoming call Slow flash green Call on hold Solid green On a call Volume up button Increases the listening volume Volume down Decreases the listening volume button Mute button Solid red Headset is muted NOTE...
Page 4
• With DA70/DA80 audio processor with Quick Disconnect (QD) DA80 DA70 Load software Download Poly Lens App to get the most out of your device. Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality. Download: poly.com/software. • Enable features •...
Page 5
Lengthen or shorten the band until it fits comfortably. The cushions should sit comfortably Adjust the headband over the center of your ears. This headset can be worn on the left or right side. Position the boom Rotate the boom to align with your mouth. CAUTION To avoid breaking the boom, only rotate it up and over 180°.
Page 6
Headset call control is a software feature and dependent on a compatible softphone. If you have not installed Poly Lens Desktop App (poly.com/software) or do not have a compatible softphone, press the headset call button first and then make/take/end the call using the softphone application.
Need help?
Do you have a question about the EncorePro 300 Series and is the answer not in the manual?
Questions and answers