Removing And Installing Rear Doors - Lenovo 42U 1200 mm Deep Dynamic Rack Installation Manual

2. Holding the door firmly with one hand, lift both hinge pins until they lock in the open position. This
releases the door from the hinges.
3. Grasp the door firmly with both hands and pull it away from the hinges; then, set the door aside.
To install a front door on the rack cabinet, complete the following steps:
1. Grasp the door firmly with both hands and align the door to the hinge pins. Slide the door onto the
hinges.
2. Holding the door with one hand, push the hinge pins down to the closed position.

Removing and installing rear doors

To remove the rear doors from the rack cabinet, complete the following steps:
1. Unlock and open the right-side door.
Figure 12. Opening and removing the rear doors
2. Hold the door firmly with one hand; then, lift both hinge pins on the inside of the door until they lock in
the open position. This releases the door from the hinges.
3. Grasp the door firmly with both hands and pull it away from the hinges; then, set the door aside.
4. Open the left-side door by squeezing the blue handles on the spring-loaded latch and pulling the
door open.
5. Hold the left-side door firmly with one hand; then, lift both hinge pins on the inside of the door until they
Figure 11. Removing a front door
21