Table of Contents
Advertisement
2.
Using the recessed handles, tilt the bottom of the side cover slightly toward you; then, lift the side cover
away from the ridge on the top of the rack cabinet.
3.
Repeat this procedure to remove the second side cover.
To install the upper side covers, reverse the removal procedure. Lock each side cover to secure it to the rack
cabinet.
Installing and removing the lower side panels
Two lower side panels and attaching hardware come with the standard rack cabinet. To attach a lower side
panel to an upper side cover, press the five plastic pins through the holes on the bottom of the upper side
cover and into the holes on the lower side panel (see the following illustration).
Figure 8. Removing an upper side cover
Figure 9. Installing an upper side cover
Side cover
Handle
Button lock
19
Advertisement
Table of Contents
