Table of Contents
Advertisement
outriggers for use in the future if you have to move the rack cabinet to another location.
Figure 5. Removing the outriggers
b. Attach the front stabilizer to the front of the rack cabinet with the screws and hex wrench that come
with the hardware kit.
c. Remove the side covers (see Removing and installing the upper side covers for instructions).
d. Attach the side stabilizer brackets to the center cage nut on each side of the rack with the hex bolts and
washers (see Figure 7). The stabilizer brackets, bolts, and washers come in the hardware kit.
Stabilizer bracket
Figure 6. Installing the front stabilizer
17
Advertisement
Table of Contents
