Removing And Installing Rack Cabinet Doors; Removing And Installing A Front Door - Lenovo 42U 1200 mm Deep Dynamic Rack Installation Manual

Figure 10. Removing and installing a lower side panel
To remove the lower side panel from the upper side cover, remove the five plastic pins. Store the lower side
panels and pins for future use.
Note: If you have to move the rack cabinet to another location, make sure that you remove the lower side
panels before you install the outriggers.

Removing and installing rack cabinet doors

All deep dynamic racks come with front and rear doors installed. Remove the rack doors when you install
and remove devices in the rack, if part of the rack is obstructed by the door as you install devices.

Removing and installing a front door

To remove a front door from the rack cabinet, complete the following steps:
1. Unlock and open the door.
Hinge
pins
20