Installation - TEXA TMD MK3 SOS Installation Manual

7.4 Installation

The additional Y-shaped cable (code 3904674) is needed for the installation.
Other specific interconnection cables can be provided upon request.
Position the device in a way it does not compromise or interfere with
driving, but also easy to reach in case of an emergency.
1. TMD MK3 EDR
2. Y-shaped cable
3. TMD MK3 HANDS-FREE SOS
Proceed as follows:
1. Secure TMD MK3 HANDS-FREE SOS in the most appropriate position*.
2. Connect the TMD MK3 HANDS-FREE SOS cable to the Y-shaped cable.
3. Insert the connector of the Y-shaped cable into the L1 input of TMD MK3 EDR.
(*) See the specific installation sheet for the vehicle you are working on.
30