Safety During The Installation - TEXA TMD MK5 Manual

3.5 Safety during the Installation

Safety Measures:
• Follow the indications provided in the vehicle's manual carefully to disassemble the plastic
parts and the access to the compartments.
• Respect the safety distances from the systems with the following functions:
• airbag;
• ABS;
• speed limiter;
• seat belt pretensioners.
Safety Measures:
• Insulate each of the device's connections to the vehicle's electrical system.
• Equip the openings crossed by cables with fairleads.
• Do not compromise in any way the quality of the electrical and mechanical OEM wiring.
• Make sure the electric cables, the wiring in general, the fuel hydraulic pipes and the safety
pneumatic devices of the vehicle are not damaged during the installation.
• Do not change the current flow of an OEM circuit by cutting it off, increasing it or mechanically
changing it cables if not permitted by the vehicle manufacturer.
• Make sure the installation does not compromise the correct functioning of the vehicle's
controls, in particular the brakes and, in general, the safety devices.
• Do not connect to the electric circuits of systems with the following functions:
• airbag;
• ABS;
• speed limiter;
• seat belt pretensioners.
Safety measures:
• Avoid contact between the device and vibrating parts of the vehicle;
The installation of the device was carefully tested by qualified
personnel in TEXA.
You must follow some indications provided by the vehicle
manufacturer in order to install the device correctly.
The installation of the device requires a connection to the vehicle's
electrical system.
Perform the connection to the vehicle's electrical system making sure
not to compromise the safety and its correct functioning.
The device must be installed so as to ensure it can work correctly and
safely.
11