Inserting The Battery - TEXA TMD MK3 SOS Installation Manual

9.3 Inserting the Battery

Before using the device, you must insert its battery.
Proceed as follows:
1. Remove the key fob from the
support.
3. Flip over the top casing and insert
the battery into its slot with the
positive pole facing upwards.
ATTENTION: Risk of explosion if the battery is replaced with
another one of the wrong type.
Dispose of the batteries following the instructions.
42
2. Separate the key fob's top casing
from the bottom one.
4. Reposition the top casing onto the
bottom one.