Harvia Pro D IP65 Supplement Note page 3

Instructions for installation and use
2.1. Connecting external main switch
The main switch is not included.
1. Feed the cable for the main switch through the cable gland
area for 230 V/400 V
2. Connect the cable with the wires of the clamps
Observe the operating instructions for the switch.
2.2. Connecting external light switch
The light switch is not included.
1. Feed the cable for the main switchthrough the cable gland
area for 230 V/400 V
2. Connect the cable with the wires of the clamps
plugs. Observe the operating instructions for the switch.
3. Technical data ProD-IP65
Ambient conditions
Dimensions (W x H x D):
Enclosure rating:
Storage temperature:
Ambient temperature:
Relative humidity:
.
3
.
3
into the connection
8
, by cutting the wire bridge.
1
into the connection
8
, by using the attached wires with
2
320 x 220 x 110 mm
IP65
-25 °C bis +70 °C
-10 °C bis +40 °C
max. 95%
non-condensing
p. 3/3
EN