Installing The Boiler; Removing The Wood Pallet From The Boiler - Navien NFC-175 Installation & Operation Manual

2. Installing the Boiler

2.1 Removing the Wood Pallet from the
boiler
After you open the box, remove the wood pallet and the pallet
brackets and then install the boiler.
CAUTION
After opening the box, verify that all included accessories are
present in the accessory box and upper container.
Removing the Wood Pallet and the Pallet Brackets
1. Loosen the six screws that secure the wood pallet on the
bottom left and right sides of the boiler.
2. Remove the accessory box, the wood pallet, the upper
container, and the lower pad.
3. Loosen the four screws that secure the pallet brackets.
CAUTION
Keep the removed screws in a safe place. The screws will be
used again in Step 5.
Accessory
Box
Upper
Container
Lower Pad
Wood Pallet
Installing the Boiler 15