Starting The Common Vent System - Navien NFC-175 Installation & Operation Manual
Nfc condensing combi-boilers
Hide thumbs
Also See for NFC-175:
- Service manual (138 pages) ,
- User's information manual (26 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
9.3 Starting the Common Vent System
9.3.1 Backflow Damper Assembly
Follow the instructions below to assemble the backflow damper
on the NFC boiler unit:
1. Remove the screws from the exhaust vent adapter.
2. Detach the exhaust vent adapter.
3. Connect the backflow damper to the exhaust duct of the boiler
unit.
4. Tighten the four mounting screws to secure the backflow
damper in place. The screws (x 4) are supplied with the
backflow damper.
Installing a Common Vent System
75
Hide quick links:
Advertisement
Table of Contents
