SubSurface Instruments AML PRO Operator's Manual page 32

APPENDIX
unit's firmware, follow the next steps:
1. Create a folder named AML Pro
firmware in a convenient location in your
computer.
2. Download the latest firmware update
from the website, to the folder you
created.
3. Connect your AML Pro to your computer
with the supplied USB mini cable.
Turn on the AML Pro; if this is the first
time connecting this AML Pro to the
computer, follow step "4". Otherwise go
to step "5".
4. An automatic notifications will display:
"New hardware has been detected"
and "Installing new device driver", when
the operating system is done with its
automatic process you can proceed
to step "5", Note: the computer will
recognize this unit when connecting
in future uses. Repeat this process for
each unit you own.
5. The Firmware Download Utility has to
Run as administrator to work properly;
there are two ways to do this:
a) Right click on the Firmware
Downloader Setup icon and select "Run
as administrator" from the dropdown
menu, (You'll have to do this every time
you run this application),
b) If you want to setup the application to
always run as administrator, follow the
next steps:
- Right click on the Icon
- Click on "Properties" at the bottom of
the dropdown menu
- Select the "Advanced" button
- Check the box for "Run as
administrator" and click "OK"
- "Apply" the changes, then click "OK"
32
Figure 32-1
Figure 32-2