SubSurface Instruments AML PRO Operator's Manual page 14

> AUTO SLEEP SEC
Use the UP ARROW or DOWN
ARROW Buttons to place the cursor
on AUTO SLEEP SEC. Press the
SELECT Button to set the AUTO
SLEEP SEC delay from 0, 10, 20 or
30 seconds. This function places the
AML Pro in sleep mode, or pause,
once the unit has stopped sensing
motion. When the AML Pro goes into
AUTO SLEEP SEC mode, the unit
automatically stops, but is ready to
start again when the unit is moved or
put into motion. This helps conserve
battery power. Select 0 to disable the
AUTO SLEEP SEC function. Press
the MENU Button to lock the setting.
> AUTO OFF MIN
Use the UP ARROW or DOWN
ARROW Buttons to place the cursor
on AUTO OFF MIN. Press the
SELECT Button to set the AUTO OFF
MIN delay to 0, 5, 20, or 30 minutes.
Select 0 to disable the AUTO OFF
MIN function. The AUTO OFF MIN
function automatically shuts the
AML Pro completely OFF when the
unit senses that it is not in use. This
function conserves battery power.
14
(Seconds)
(Minutes)
speaker volume
phones volume
auto sleep sec
>
auto off m i n
check cal i brat i on
factory sett i ngs
Figure 14-1
speaker volume
phones volume
auto sleep sec
auto off m i n
>
check cal i brat i on
factory sett i ngs
Figure 14-2
2
2
1 0
05
0
0
2
2
1 0
05
0
0