SubSurface Instruments AML PRO Operator's Manual page 12

On the left side of the screen
Time and GPS:
RTC
(Real Time Clock)
Time is read in hours, minutes, and
seconds.
GPS
(Global Positioning System)
Digits on the screen are read in
degrees, minutes, and seconds,
Latitude: N for North of the equator or
S for South of the equator. Longitude:
E for East of the Prime Meridian or W
for West of the Prime Meridian.
On the right side of the screen
Status Lines:
SATS
(Satellites)
of satellites in which the AML Pro is
communicating. To increase the level
of accuracy it is preferable to use 7 or
more satellites.
As referenced from the
DEG
(Degree)
blade face angle of the AML Pro.
SEN
(Sensitivity Level)
selected SENSITIVITY Level of the
AML Pro (1 to 32). Use the UP or
DOWN arrow Buttons to set the SEN
level from 1 to 32 with 32 being the
most sensitive.
Digital Target Indicators
The target indicators appear at the
bottom of the screen. Both bars
will come together when a target is
positively identified.
TX
(Transmitter)
Press the TX Button to turn the
transmitter ON or OFF. When the
transmitter is OFF, a STANDBY
message on the right side of the
screen will appear (see figure 12-
4). When the transmitter is turned
back on, the message will change to
OPERATE (see figure 12-5).
12
refers to the number
shows the
RTC 16 27 57
044 27 4494 N
088 07 6298 W
Figure 12-1
RTC 16 27 57
044 27 4494 N
088 07 6298 W
Figure 12-2
RTC 16 27 57
044 27 4494 N
088 07 6298 W
RTC 16 27 57
044 27 4494 N
088 07 6298 W
Figure 12-3
RTC 16 27 57
044 27 4494 N
088 07 6298 W
Figure 12-4
RTC 16 27 57
044 27 4494 N
088 07 6298 W
Figure 12-5
RTC 16 27 57
044 27 4494 N
sats 09
DEG 86
SEN 17
sats 09
DEG 86
SEN 17
sats 09
DEG 86
SEN 17
OPERATE
DEG 86
SEN 17
STANDBY
DEG 86
SEN 17
OPERATE
DEG 86
SEN 17
STANDBY
DEG 86