HDCam Installation Manual
Installation
Indoor Preliminary Setup
*****SETTING THE HDCAM UP INDOORS ON THE NETWORK IS ESSENTIAL
FOR THE SUCCESSFUL OUTDOOR INSTALLATION OF YOUR CAMERA. *****
By following these preliminary steps you will have the ability to obtain the internal
IP address of the HDCam, which you need in order to view the live video
transmitted from the HDCam. It is imperative that you install the camera indoors
initially in order to guarantee that the camera is working as it should. In order for the
camera to transmit images as it is designed to, TCP port 21 (FTP) outbound MUST be
open for the internal IP address of the camera.
In order to test the camera indoors you will need the following supplied equipment:
HDCam
200 ft cable
Power Supply
Network Surge Suppressor
5 ft cable
You will need to have access to a computer running on the same subnet (network) as the
network connection that you will connect the camera to for this test. You will also need
an electrical outlet nearby.
EN.PM.UM11 2017022424
35
Earth Networks Part # 9710
Page 12 of