Table of Contents
Advertisement
HDCam Installation Manual
Tools Needed
(Not supplied by Earth Networks)
Wire cutters and pliers
#2 Phillips screwdriver
7/16" Wrench
9/16" Wrench
Heavy-duty drill with bits sized up to 1-1/4" – bits must be appropriate for
material being drilled into (masonry, wood, metal, etc.) and must be long enough
to penetrate the support walling from exterior to interior (possibly as much as 10"
or more).
Socket drivers, designed to be used with a drill, of the size(s) needed to fit the
screws intended for use in mounting the HDCam.
Fish Tape to pull cable through wall
Electrical Tape to tape the ends of cables for protection and to hold connectors
and cables together.
Bolts/Screws needed to attach the mounting arm to the wall will very according to
several factors. Both the composition of the mounting surface and the weight of
the unit (4.5 pounds) must be taken into account.
An adjustable ladder
Leveling device
EN.PM.UM11 2017022424
35
Earth Networks Part # 9710
Page 10 of
Advertisement
Table of Contents
