Startup / Operation - BOMANN KG 322 Instruction Manual

 Transfer the upper door hinge to the appliance
opposite side after unscrewing the hinge pin and
reinserting it from the other hinge side.
Insert the hinge pin into the hole of the upper unit
door and fasten the hinge (1) with the screws (2).
 Insert the hinge cover (3) supplied in the accesso-
ry bag.
NOTE:
Keep the hinge cover (removed at the beginning)
for a further possible change of the door opening.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
Starting the appliance
 Connect the appliance to the power supply.
 Operate the temperature control. See also the
section "Settings".
Settings
Setting [ 0 ] means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
The power levels [ 1–7 ] regulate the different values
of the internal temperature.
Setting 0 Setting 1
Off state Lowest setting
(warmest inside
temperature)
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the amount of food in the appliance.
During initial operation, turn the temperature control
to the highest setting first, until the appliance has
reached the desired operating temperature. After-
wards it is recommended to turn the control back to a
medium setting; correcting the temperature at a later
point would then be easier.
Interior light
When opening the fridge door, the interior light will
turn on automatically.
Storing food
NOTE: Recommendation!
To guarantee that the temperature is low enough,
you should pre-cool the appliance a few times before
initial loading foods.
CAUTION:
Always pay attention to the storage instructions on
the sales packaging.
To avoid contamination of food, respect the following
instructions:
 Opening the door for long periods can cause a
significant increase of the temperature in the
compartments of the appliance.
 Clean regularly surfaces that can come in contact
with food and accessible drainage systems (see
"Cleaning and Maintenance").
21
Setting 7
Highest setting
(coldest inside
temperature)