BOMANN KG 322 Instruction Manual page 20

Reversing the door opening
If required, the door openings can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stops, the appliance must
be disconnected from the power supply first.
NOTE:
 Ask another person to assist.
You possibly need:

driver as well as a thin-blade screwdriver.
 Take off the hinge cover (1).
Lift the upper unit door from the middle door

hinge. Loosen the screw (1) and move the part (2)
with the screw (1) on the other door bottom side.
Place the door safely aside.
Remove the dummy cap on the appliance top and

insert it into the opposite exposed holes.
Disassemble the middle door hinge (2) by loosen-

ing the screws (1). Lift the lower unit door from
the lower door hinge.
Loosen the screw (1) and move the part (2) with

the screw (1) on the other door bottom side. Place
the door safely aside.
screw wrench, Phillips screw-
Loosen the screws (2) and
remove the upper door hinge
(3).
Move the dummy plugs on the exposed holes of

the middle door hinge.
 Tilt the unit slightly backwards and place it in this
position.
 Disassemble the lower door hinge (1) including
foot (3) by loosening the screws (4). Unscrew the
separate foot (2) and remove the dummy plug (5).
 Unscrew the hinge pin and reinsert it on the other
Fasten the lower door hinge (1) including foot (3)

with the screws (4). Screw in the separate foot (2)
and move the dummy plug (5).
Return the unit to the upright position. Place the

lower unit door on the lower hinge pin and secure
it in its intended position.
Rotate the middle door hinge about 180° and

transfer it to the appliance opposite side. Insert
the hinge pin into the hole of the lower unit door
and secure the hinge.
 Place the upper unit door on the middle hinge pin
and secure it in its intended position.
20
hinge side.