Switching The Wine Conditioning Unit On And Off; Operating The Wine Conditioning Unit; Switching The Wine Conditioning Unit On - Miele KWT 6722 iS Operating And Installation Instructions

Switching the wine conditioning unit on and off

Before first use
Packaging material
 Remove all packaging material from
the inside of the appliance.
Cleaning
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the wine condi-
tioning unit and the accessories.
18
Operating the wine condition-
ing unit
A light touch of the finger on the sen-
sors is all that is required to operate this
wine conditioning unit.
Every touch of a sensor is confirmed
with an audible keypad tone. This key-
pad tone can be switched off (see
"Acoustic signals " under "Selecting
additional settings").
Switching the wine conditioning unit
on
When the wine conditioning unit is con-
nected to the electricity supply, the
power connection symbol  will ap-
pear on the display after a short while.
 Touch the On/Off sensor.
The power connection symbol  will
go out and the wine conditioning unit
will start to cool.
The selected wine conditioning zone
will be highlighted yellow and the tem-
perature of the selected zone will show
on the display.
The first time the appliance is switched
on, the sensors for the wine condition-
ing zones and the alarm symbol  will
flash until the selected temperature has
been reached in the zones.
As soon as the set temperature has
been reached, the sensor for the re-
spective wine conditioning zone will
light up constantly and the alarm sym-
bol  will go out.