Labeling The Wooden Racks; Setting Up The 3D Bottle Presenter - Miele KWT 6722 iS Operating And Installation Instructions

Labeling the wooden racks

For quick and easy identification of the
wines stored, you can write on the
blackboard-painted surface on the
magnetic strips on the wooden shelves.
Use the chalk supplied. You can write
directly on the magnetic strip or remove
it from the wooden shelf. To do so:
 Hold the magnetic strip by the sides
and pull it forwards. The magnetic
strip is held on the wooden shelf by
magnets.
 The magnetic strip can be wiped
clean with a damp cloth.

Risk of damage from unsuitable
cleaning methods.
Cleaning the magnetic strips with a
cleaning agent may damage the
blackboard surface on them.
Use clean water only to wipe the
magnetic strips.
 Annotate the magnetic strip with the
chalk supplied and replace it on the
front of the wooden shelf.
Storing wine bottles

Setting up the 3D bottle presenter

Set up the 3D bottle presenter in the
bottom of the wine conditioning unit:
 Fold out the rear legs  of the 3D
bottle presenter.
 Simply lift individual slats  on the
shelf forwards to move or remove
them from the wooden shelves. This
will adapt the 3D bottle presenter
perfectly to the size of the wine bot-
tles.
 Carefully place the wine bottles on
the 3D bottle presenter.
Tip: You can place your chalk in the
chalk rest  on the 3D bottle presenter
to prevent it from getting lost.
41