Miele KWT 6722 iS Operating And Installation Instructions page 23

Setting the temperature display to
Fahrenheit
 Touch the settings sensor.
All symbols available for selection will
appear on the display and the  sym-
bol will flash.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
°C and °F flash on the display.
 Touch the OK sensor to confirm the
selection.
°C will flash on the display.
 You can now select °F by touching
the  or  sensors.
 Touch the OK sensor to confirm the
selection.
The selected setting is saved.
Selecting additional settings
 Touch the settings sensor to exit set-
tings mode.
If you do not do this, the appliance
electronics will exit settings mode au-
tomatically after approximately
1 minute.
The temperature will now be displayed
in Fahrenheit.
23