Installing The Wine Conditioning Unit; Before Starting; Tools Required - Miele KWT 2671 ViS Operating And Installation Instructions

Wine conditioning unit
Hide thumbs Also See for KWT 2671 ViS:
Table of Contents

Advertisement

Installing the wine conditioning
unit
Before starting ...
It is essential to read these operating
and installation instructions carefully
before starting to install the wine
conditioning unit.
The wine conditioning unit should be
installed by a suitably qualified in-
staller in accordance with these op-
erating and installation instructions.
Safe operation of the wine condition-
ing unit is only assured if it has been
installed and connected in accord-
ance with these operating and in-
stallation instructions.
Risk of damage and injury from
the wine conditioning unit tipping
over.
The wine conditioning unit is very
heavy and can tip forwards when the
appliance door is open.
Keep the appliance door shut until
the wine conditioning unit has been
built in and secured in its building-in
niche in accordance with these oper-
ating and installation instructions.
Due to its weight and size, the wine
conditioning unit must be installed
by two people.

Tools required

– Cordless drill
– TX 20 screwdriver
– Hammer drill
– Drill bits in various sizes,
depending on materials
– Hammer
– Open spanner
– Ratchet wrench, attachment: socket,
8 mm
– Adhesive tape
– Utility knife
– Pipe wrench
– Spirit level
– Tape measure
– Pencil
Other
– Step ladder
– Sack truck
Installation
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kwt 2661 vis

Table of Contents