Advertisement
740B Clifty Drive • Madison, Indiana 47250 • 812-574-7777
Read instructions and view illustrations before beginning.
Need help with your installation?
sales@superatv.com
1-812-574-7777
Thank You
© 2013 SuperATV.com. All Rights Reserved.
www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
For Choosing
INSTALLATION INSTRUCTIONS
Polaris RZRXP Front Brush Guard
Liability Statement
SuperATV's products are designed to best fit users ATV/UTV under stock conditions.
Adding, modifying, or fabricating any factory, or aftermarket, parts will void any
warranty provided by SuperATV and is not recommended. SuperATV's products
could interfere with other aftermarket accessories. If user has aftermarket products
on machine, contact SuperATV to verify that they will work together.
Although SuperATV has thousands of satisfied customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc will change the ride
of machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product's ability to
protect user from severe injury or death. SuperATV urges operators and occupants
to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV products, user agrees that should damages
occur, SuperATV will not be held responsible for loss of time, use, labor fees,
replacement parts, or freight charges. SuperATV, nor any 3rd party, will not be held
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV. The total liability of seller to
user for all damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim.
SuperATV will warranty only parts provided by SuperATV. Any damage or problems
with OEM housings, bearings, seals, or other manufacturers products will not be
covered by SuperATV. SuperATV parts and products are not warrantied if item was
not installed properly, misused, or modified.
IN-FBG-P-RZR-002 2/28/2013
Advertisement
Table of Contents
Related Manuals for SuperATV IN-FBG-P-RZR-002
Summary of Contents for SuperATV IN-FBG-P-RZR-002
- Page 1 By purchasing and installing SuperATV products, user agrees that should damages 9:00am - 2:00pm EST Saturday occur, SuperATV will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV, nor any 3rd party, will not be held...
- Page 2 Kit Contents Item Description Item Description Hoop M8 Flat Washers Short Grill M8-1.25 x 25mm Lg. Carriage Head Bolts Front Bumper M8-1.25 x 30mm Lg. HHCS Front Bracket M8-1.25 Nylock Nuts Left Bracket M8-1.25 x 20mm Lg. SHCS Rear Bracket 5/16”...
- Page 3 Do not tighten hardware completely unless noted. Fig. 1 Keep stock hardware for reuse. 1. Remove stock Bumper. See Figs. 1 - 1b. 2. Remove stock Grill Insert. See Fig. 1c. 3. Install Hoop (A) to Front Bumper (C) with M8- 1.25 x 20mm Lg.
- Page 4 (installation illustrations continued) Fig. 2 Fig. 4 mounting locations Fig. 4a Fig. 2a Fig. 3 secure with stock hardware Fig. 5 Item Description Item Description Hoop M8 Flat Washers Short Grill M8-1.25 Nylock Nuts Front Bumper M8-1.25 x 20mm Lg. SHCS Left Bracket 5/16”...
- Page 5 (installation illustrations continued) Fig. 6 (3) accessory mounting holes provided Fig. 6a Installed PARTS REFERENCE Item Description Hoop Short Grill Front Bumper Front Bracket Left Bracket Rear Bracket Right Bracket M8 Flat Washers M8-1.25 x 25mm Lg. Carriage Head Bolts M8-1.25 x 30mm Lg.
Need help?
Do you have a question about the IN-FBG-P-RZR-002 and is the answer not in the manual?
Questions and answers