Advertisement
2753 Michigan Road • Madison, Indiana 47250 • 812-574-7777
Mount Clamp x 4
Seal
2x
Read instructions and view illustrations before beginning.
Need help with your installation?
sales@superatv.com
1-812-574-7777
Thank You
®
© 2016 SuperATV.com
. All Rights Reserved.
Left Vent
Thumb Screw
8x
www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
For Choosing
INSTALLATION INSTRUCTIONS
Full Vented Windshield
for Polaris RZR
SuperATV does not recommend keeping Windshield
installed while transporting on an open air trailer.
Shoulder Screw
Liability Statement
SuperATV's
products are designed to best fit user's ATV/UTV under stock
®
conditions. Adding, modifying, or fabricating any factory or aftermarket parts will
void any warranty provided by SuperATV
products could interfere with other aftermarket accessories. If user has aftermarket
products on machine, contact SuperATV
Although SuperATV
has thousands of satisfied customers, user should be aware
®
that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride
of machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product's ability to
protect user from severe injury or death. SuperATV
to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV
occur, SuperATV
will not be held responsible for loss of time, use, labor fees,
®
replacement parts, or freight charges. SuperATV
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV
user for all damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim.
SuperATV
will warranty only parts provided by SuperATV
®
problems with OEM housings, bearings, seals, or other manufacturers' products will
not be covered by SuperATV
item was not installed properly, misused, or modified.
XP 1000
®
Windshield
Right Vent
8x
Acorn Nut
and is not recommended. SuperATV's
®
to verify that they will work together.
®
urges operators and occupants
®
products, user agrees that should damages
®
, nor any 3rd party, will not be held
®
. The total liability of seller to
®
. Any damage or
®
. SuperATV
parts and products are not warrantied if
®
®
IN-WS-P-RZR1K-V 6/9/2016
®
Advertisement
Table of Contents
Related Manuals for SuperATV IN-WS-P-RZR1K-V
Summary of Contents for SuperATV IN-WS-P-RZR1K-V
- Page 1 No warranty or representation is made as to this product’s ability to 8:00am - 9:00pm EST M-Th protect user from severe injury or death. SuperATV urges operators and occupants ®...
- Page 2 To ease installation, soak Seal in hot water before cutting or installing to increase flexibility. Install Seal to bottom edge of Windshield Seal Captive Nut Windshields contain shipping bolts that hold Captive Nuts in place. Remove and discard shipping bolts. IN-WS-P-RZR1K-V...
- Page 3 1. Thouroughly rinse Windshield to float off dirt and mud. 2. Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo or hand washing soap are recommended. 3. To prevent water spots, use a chamois and blot Windshield dry. IN-WS-P-RZR1K-V...
- Page 4 Front Windshield Right Vent (passenger side) install Thumb Screw though each Vent and into factory installed Captive Nut. Thumb Screw - Insert Clamps into slots in Windshield. Wrap straps around Cage and through Clamps. Seal in contact with Hood IN-WS-P-RZR1K-V...
Need help?
Do you have a question about the IN-WS-P-RZR1K-V and is the answer not in the manual?
Questions and answers